GV300TP User Manual
TRACGV300TPUM001
- 18 -
Figure 13.
Typical Connection with LED (Positive Output)
Note:
1. OUT1 will latch the output state during reset.
2. Many modern relays come with a flyback
diode pre-installed internal to the relay itself. If the
relay has this diode, ensure the relay polarity is properly connected. If this diode is not internal, it
should be added externally. A common diode such as a 1N4004 will work in most circumstances.
3.11.Device Status LED
Figure 14.GV300TP LED on the Case