Quebic Industries QueBQ, Инструкция по сборке

Страница: 4 / 11

ASSEMBLY
See Figure 1 -
When received, remove the parts boxes and the fire grate from
inside the QueBQ firebox. Do not take the QueBQ body off the
cardboard pallet base. Install the four casters on the QueBQ body.
On the cardboard base, pull loose the flaps holding the lip of the
cardboard. Fold the lip down, then carefully roll the body off of the
pallet base and upright.
CAUTION: Two people are required for
safe removal of the body. The staples are sharp and can cut or
damage the coating system. Some parts may contain sharp
edges. Wear protective gloves if necessary. Be careful about
how the door swings when rolling the body off.
The fire grate
can be re-inserted in bottom of the firebox once it is upright.
4