QUBINO ZMNHZD2, Руководство пользователя, Страница: 26 / 43

EN .
26
Parameter No. 3 – Wind Gauge, Wind Gust
Values (size is 1 byte dec):

default value 1

0 - If the Wind Gust is higher than the parameter No. 1 value, then the device sends a
BasicSet(0x00) command.

1 - If the Wind Gust is Higher than the parameter No. 1 value, then the device sends
BasicSet(0xFF) command.
Parameter No. 4 – Rain Gauge, Rain Rate
Values (size is 1 byte dec):

default value 1

0 - If the Rain rate is Higher than the Parameter No. 2 value, then the device sends a
BasicSet(0x00) command.

1 - If the Rain rate is Higher than the Parameter No. 2 value, then the device sends
BasicSet(0xFF) command.
Unsolicited Report
If you enable Unsolicited Reports on the End Points, the USB Key will send data to the gateway
(hub) every time it receives data from the 433MHz sensors, which are different from the
previous data.