QubicaAMF Highway 66, Руководство пользователя, Страница: 39 / 200

SETTING UP/OPERATING YOUR HIGHWAY 66
Procedure 2-7 - Adjusting the Pin Brakes
1. Raise the front cover of the pinsetter and press the Power On button.
The pinsetter will start up and set the pins on the lane.
2. Press button #1 (PS Brake). The drawbar will move to the rear of the
pinsetter and each pin brake will be activated.
3. The brake plate may be moved in the direction shown by the arrows
in Figure 2.7. Slightly loosen the bolts which hold the brake plate in
place and then raise the brake plate to loosen the pin's string or lower
the brake plate to tighten the pin's string.
4. Press button #3 (Full Set) to reestablish normal functions.
Figure 2-7 - Pin Brake Adjustment
Procedure 2-8 - Pin Brake Adjustment
Pin brakes should be inspected weekly and if necessary, adjusted. The
solenoid (A) pulls the cam (B) which jams the string on the brake plate (C).
If a pin is lowered to the lane when it should stay up or if a pin stays up when
it should be lowered to the lane, the pin brakes need adjusting. Follow the
procedure above to adjust your pin brakes.
39