First steps
First dreams
Quax
®
www
.quax.eu
41
TRENDY
54 04 45xx
Armoire avec 1 porte battante
Wardrobe with one door
Kleerkast met één draaideur
Schrank mit Drehtür
Step 9 :
Use the drawer components from step
3
, two drawer bottoms
DR4
, eight wood screws
F
and eight
eccentrics
C
Place a drawer back (
DR3
) with the groove facing inwards between the sides (
DR2L
and
DR2R
). Push two
wood screws (
F
) into the provided drillings at the back of each side and tighten them in the back. Slide a
drawer bottom (
DR4
) into the slots on the sides and the back. Push four eccentrics (
C
) into the holes on the
inside of each drawer side (
DR2L
and
DR2R
). Push the drawer fronts with their connectors into the holes
and over the wooden dowels of the drawer sides and tighten the eccentrics. Repeat with the other drawer.
Pull out the drawer slides and fi rst place the lower drawer against the stop at the end of the gliders. Push
the drawer over the stop at the front of the slides. Finally place the top drawer. Height adjustment of the
drawers : adjust the front stop on the slides.
Step 10 :
Use the parts of step
12
and two pieces of wall mount fi ttings
M
The provided screws are intended to fi x the hardware to the cabinet. Check your wall and use custom wall
studs in the specialized retail trade. Use these bolts to fasten the lip in the wall (
2
). Then attach the lip to
the wardrobe (
4
).
