LOUISE
01 02 43XX
Parc enfant avec fond réglable
Playpen with adjustable bottom
Kinderpark met verstelbare bodem
Laufgitter mit verstelbarer Boden
Quax
®
Quax
®
First dreams
First steps
3. Parts list and assembing the bathing cabinet
Check whether all parts mentioned below are included in the packaging.
Baignoire et table à langer
Bath and diaper cabinet
Bad- en luiermeubel
Wickel- und Bademöbel
SMART Comfort
05 05 19xx
www
.quax.eu
22
S
: 1 x Bathtub in white pvc
O
: 12 x Cylindrical nut
P
: 12 x Bolt M6*60 mm
R
: 1 x Hexagonal key
3.1 Assembling the towel support
Push both woodscrews
Q
in the provided openings of the frontal part
E
and slightly fasten them in the parts
H
.
Insert the piece
I
in the special openings on both parts
H
. Now tighten the screws
Q
.
3.2 Assembling the structure
Insert the cylindrical nuts
O
in the provided openings at the bottom of parts
E
and assemble them with the leg-
frames
D
as shown in the upper detail drawing by inserting and fastening the bolts
P
through the drillings of the
frames. Repeat this action with the parts
G
.
(Attention : do not fully tighten the joints
).
3.3 Inserting the shelves
Slide the shelves
F
diagonally across the sliders and with the stoppers underneath the sliders following the lower
detail picture.
3.4 Installing the wheels
Insert the adapters for the wheels in the provided openings of the legs and push the wheels
W
into place.
3.5 Installing the bathtub
Push the bathtub
S
on the structure formed by parts
D
and
E
. Now tighten the bolts
P
on all joints.
Q
: 2 x Wood screw 7*50 mm
W
: 2 x Wheel with brake and two without.
