First steps
First dreams
Quax
®
First steps
First dreams
Quax
®
4. Assembling the playpen
17
www
.quax.eu
MILA
01 02 BDP
Parc enfant avec fond réglable
Playpen with adjustable bottom
Kinderpark met verstelbare bodem
Laufgitter mit verstelbarer Boden
Step 1 :
Use parts A, B and the 8 large bolts (E)
Place the 8 large bolts (E) in the provided openings on the upperside and the bottom of the legstructures
(A). Insert the sides (B) with the holes on the bars faced inwards the box, between the legstructures and
pull the bolts one by one backwards and push them back into the openings of the sides. The sides are
now hanging free between the legs.
Step 2 :
Use the 8 cylindrical dowels M6 (F) and the parts of step1
Insert one by one the cylindrical dowels (F) in the provided openings of the sides (B). Pay attention that
the opening in the dowel faces the bolt. Tighten slightly with the hexagonal key (H). Repeat this action for
the remaining 7 bolts.
Step 3 :
Use the parts of step 2, the bottom J, 4 crochet hooks (D), 4 spacers (G), 4 short bolts (C) and
the 4 nuts M6 (K)
Place the crochet hooks (D) in the provided openings on the legs (A). Pay attention that the four of these
are on the same height of one of the possible positions for the base. Insert the base (J) into the playpen
and let it rest on the crochet hooks. Push a short bolt (C) through an opening of the base and the under-
lying crochet hook, place one spacer (G), a nut (K) and thighten slightly. Repeat for the remaining three
bolts. Finally tighten.
Step 4 :
FInally fasten all large bolts fi rmly (E - step 2)
Step 5 :
Changing the position of the base
Redo all actions of step 3 in reversed order. Replace the crochet hooks on a diff erent level and repeat
step 3.
Step 6 : placing the wheels W
First push the black cap on the metal rod of the wheel and then insert the wheel in the pre-drilled hole.
Caution !
Do not hammer, otherwise the wood can split.
