COCOON
54F01-01XL00x
4. Assembling the bed
Quax nv
Karel Picquélaan 84 B-9800 Deinze Belgium
T
T
0032 9 380 80 95 www.quax.eu -
E
E
29
Step 4.1
: Use both bed rails
4
, four cylindrical nuts
C
, fourteen wooden dowels
G
, both crossbars
5
, four mounting plates
H
, sixteen wood screws
J
, both low headboards
3
, four wood screws
I
, four bolts
B
and the four legs
K
Push two cylindrical nuts (
C
) into the drillings on the inside of the bed rails (
4
). Push four wooden dowels (
G
) into the
holes on the edges of the bed rails. Push three wooden dowels (
G
) into the holes on the side of the crossbars (
5
). Push
the crossbars with their wooden dowels into the drillings of the low headboards (
3
). Push this construction onto the
wooden dowels of the bed rails. Push the bolts (
B
) through the holes of the lower headboards and tighten the minifi x of
the bed rails. Turn the bed over, push the wood screws (
I
) into the drillings of the crossbars and tighten into the support
profi les of the bed rails. Place the mounting plates (
H
) on the holes of the crossbars. Push the wood screws (
J
) into the
drillings of the mounting plates and tighten in the crossbars. Tighten the legs (
K
) in the mounting plates.
