CROOZ
51-516-xx
Quax nv
Karel Picquélaan 84 B-9800 Deinze Belgium
T
T
0032 9 380 80 95 www.quax.eu -
E
E
28
3. Unfolding the pram
Open the locking mechanism on the left side of the pram (
2
). Pull up the handle until the frame automatically locks with
an audible click (
3
).
Attention
: before using the pram check whether it has been correctly unfolded.
4. Installation of the rear suspension
To install the rear suspension, push the bar with the brake system onto the chassis until you hear a click on both sides
of the chassis (
4
).
5. Installation and disassembly of the rear wheels
Press the button on the central part of the wheel (
5
) to unlock the rear wheels and remove them from the axle (
6
). To
reassemble, push the button down and slide the wheels onto the axle until they are locked.
Attention
:
before using the
pram check if all wheels are mounted correctly.
6. Installation of the frontal rotating wheels
Push the front wheels with their wheel anchor (
7
) in their intended place on the frame until they automatically lock with an
audible click (
8
). Make sure the wheels are properly anchored. The front wheels are equipped with a locking mechanism
for driving straight on. To do this, turn the ring of the mechanism outwards (
9
).
