Ref: EGO4446/EGO400-UM-Rev.B. UK 7
The mover has two Motor Units (1 & 2). In general they are mounted in front of the axle of the caravan/trailer. Both units are
identical but cannot be switched. Please refer to Fig.2 for Model No: EGO400 and Fig.4 for Model No: EM4446
Fig.2/Fig4
A:
Drive roller
B:
12V
Motor
C:
Connection Terminals (+ and -)
D:
Base
Unit
E:
Drive
Unit
F:
Gear
Housing
G:
Engagement
Bar
Always ensure that you are close enough to engage the caravan’s handbrake when manoeuvring on
uneven terrain and gradients/slopes in case of mechanical failure. Do not use the mover as a brake,
when you have finished manoeuvring always engage the caravan’s handbrake.
Warning! Ensure that there are no persons or obstructions in the vicinity of the caravan prior to testing.
In order to engage the rollers, fit the end socket of the Engagement Tool (6) on the spindle (Fig.2G, Fig.4G, Fig.7A & Fig.11A) on the
right or left drive unit.
Position the engagement tool parallel to the ground, then rotate the tool through approximately 180° degrees.
Note: to engage the rollers you always rotate the tool towards the tyre, irrespective of which side you are operating the
engagement from.
The engagement mechanism utilises a simple over-centre cam that pushes the rollers onto the tyres and then locks into place
automatically. If the mover has been installed correctly, at exactly 20mm away from the tyres when disengaged, the amount of
force provided onto the tyre by the roller will be sufficient for most circumstances of use (Fig.10 & Fig.13).
To disengage the rollers, simply refit the tool onto one of the spindles and rotate away from the tyre. Please note that you will feel
a small amount of resistance initially as you disengage the cam from its locked position; the spring will then do the rest of the
work and pull the roller away from the tyre and into the fully disengaged position (Fig.12).
The Remote Control handset (31) is powered by three ‘AAA’ 1.5V batteries, and is activated by double-pressing the power button
(Fig.3A). Once activated the green LED (Fig.3H) will illuminate and the directional controls can now be used. If the handset has not
been used for a period of 60 seconds then it will automatically switch itself off.
Fig.3
A = On (press button twice within one second, green LED (Fig.3H) illuminates)
B = Caravan forwards (both wheels rotate in forwards direction)
C = Caravan reverse (both wheels rotate in reverse direction)
D = Caravan left forwards (right wheel rotates in forwards direction)
E = Caravan right forwards (left wheel rotates in forwards direction)
F = Caravan left reverse (right wheel rotates in reverse direction)
G = Caravan right reverse (left wheel rotates in reverse direction)
H = Indication LED
Operation - Motor Units
Engaging the Rollers
Operation - Remote Control Handset
Содержание Enduro EM4446
Страница 8: ...Fig 22...
