background image

Warranty Information

Quatech Inc. warrants the

 

     QSP-100     

 

to be free of defects for 

 five (5) years   

 from the

date of purchase.  Quatech Inc. will repair or replace any adapter that fails to perform under
normal operating conditions and in accordance with the procedures outlined in this document
during the warranty period.  Any damage that results from improper installation, operation, or
general misuse voids all warranty rights.

The authors have taken due care in the preparation of this document and any associated

software program(s).  In no event will Quatech Inc. be liable for damages of any kind, incidental
or consequential, in regard to or arising out of the performance or form of the materials presented
herein and in the program(s) accompanying this document.  No representation is made regarding
the suitability of this product for any particular purpose.

Quatech Inc. reserves the right to edit or append to this document or the product(s) to

which it refers at any time and without notice.

Please complete the following information and retain for your records.  Have this infor-

mation available when requesting warranty service.

Date of purchase:

                                                                             

Model Number:

   QSP-100                                                           

Product Description:

   4 Channel Asynchronous RS-232                    
 Communications Adapter                                  

Serial Number:

                                                                             

Содержание QSP-100









































Отзывы: