4.1.1 USING ATA CARDS
Insert the ATA card(s) into the PCD2-F. The ATA card(s) will be
assigned a drive letter. Find which drive letter(s) have been
assigned to the cards by going into the Cardsoft directory and
typing "CARDINFO /V" and pressing <Enter>. The following
or a similar message will be displayed.
Slot 0:
[ Card Information]
Card Type = "ATA Disk" (Drive D)
Manufacturer=<Vendor Name>
Product Name=<Vendor Product Name>
All standard DOS commands, including FORMAT, will work with
the ATA cards.
4.1.2 USING SRAM CARDS
Insert the card(s) into the PCD2-F. Drive letter(s) will be reserved
for the card(s). Find out which drive letter(s) have been assigned
by going into the Cardsoft directory and type "MTDDRV /V" and
pressing <Enter>. The following or a message similar to the
following will be displayed.
Drive D is partition number 00 for slot 00
Drive E is partition number 11 for slot 01
In the above example, drive letter D is assigned to slot 0,
and drive letter E is assigned to slot 1. All standard DOS
commands, including FORMAT, will work with the SRAM
cards.
4.1.3 USING FLASH CARDS
To use flash cards, an optional Flash File System II is required.
Refer to the section "Before Using PC Cards" to be sure the proper
drivers are loaded into the CONFIG.SYS file. Before using a Flash
Card, the card must be formatted. To format Flash Cards, type
"cd
Cardsoft" from the DOS prompt and press<Enter>. It is required to
execute the MEMCARD utility from Cardsoft. When
MEMCARD is executed, a menu with various options will appear.
PCD2-F User's Manual
9
