manualshive.com logo in svg

Quatech ES-100M, Руководство пользователя

Поделиться
Скачать
Quatech ES-100M Скачать руководство пользователя страница 3

WARRANTY INFORMATION

Quatech Inc. warrants the

    ES-100M / QS-100M    

to be free of

defects for    one (1) year    from the date of purchase.  Quatech Inc. will
repair or replace any adapter that fails to perform under normal operating
conditions and in accordance with the procedures outlined in this
document during the warranty period.  Any damage that results from
improper installation, operation, or general misuse voids all warranty
rights.

The authors have taken due care in the preparation of this

document and any associated software program(s).  In no event will
Quatech Inc. be liable for damages of any kind, incidental or
consequential, in regard to or arising out of the performance or form of
the materials presented herein and in the program(s) accompanying this
document.  No representation is made regarding the suitability of this
product for any particular purpose.

Quatech Inc. reserves the right to edit or append to this document

or the product(s) to which it refers at any time and without notice.

Please complete the following information and retain for your

records.  Have this information available when requesting warranty
service.

Date of purchase:

                                                                        

Model Number:

   ES-100 / QS-100M                                       

Product Description:    Multi-port Asynchronous Communications   

   Adapter                                                         

Serial Number:

                                                                        

Содержание ES-100M


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды