TIMTER™ Multi
-mode Dual
Telemetry Transmitter
102
Quasonix, Inc.
11.1.1 Compact Receiver
The Compact receiver normally requires only a single direct connection of the RF input from a transmitter, as shown
in Figure 51.
Figure 51: Example Bench RF Configuration for Single Transmitter and Compact Receiver
For STC, the Compact receiver still requires only a single RF input but it must be the combined RF outputs from
Channel 1 and Channel 2 of the dual transmitter, as shown in Figure 52.
Figure 52: Example Bench RF Configuration for Dual Transmitter and Compact Receiver
11.1.2 Rack Mount Receiver
A Rack Mount receiver normally requires a splitter to accept the RF input from a transmitter to separate it into
Channel 1 and Channel 2 inputs at the receiver, as shown in Figure 53 and Figure 54.
Quasonix Dual
Transmitter
Ch2
Ch1
Two RF Signals from
Dual Transmitter
Combined into One Signal
Signal
Splitter/
Combiner
Single RF Signal-Direct
Connect from Transmitter to
Compact Receiver
Quasonix Compact RDMS Receiver
