Quasonix RDMS, Инструкция по установке и эксплуатации

Страница: 117 / 251

3
rd
Generation Rack-
Mount RDMS™
97 Quasonix, Inc.
2. Type the IP subnet in the IP Subnet entry screen (Figure 162), then press the Enter key.
3. To exit without making a change, press the Esc key.
Figure 161: IP Subnet Selection Figure 162: IP Subnet Entry
Gateway
The Gateway address is used to set the Gateway network IP address, if required. Contact your network administrator
for the correct gateway address.
1. To assign the Gateway IP address, use the down arrow on the keypad to highlight Gateway (Figure 163),
then press the Enter key.
2. Type the Gateway address in the Gateway entry screen (Figure 164), then press the Enter key.
3. To exit without making a change, press the Esc key.
Figure 163: Gateway Selection Figure 164: Gateway Entry
TMoIP Address
In an RDMS TMoIP unit, the TMoIP address displays on the Ethernet screen, as shown in Figure 165. The TMoIP
address for the rack unit is assigned automatically.