*When calling up a delay effect a synchronized delay time will be pre-set. That's why you can
change the different note values by calling up the basic types.
EFFECT VOLUME (LEVEL): MENU PAGE 2
On menu page 2 you can control the effect volume:
Edit Part1 FX1
<2> Level: 20
REVERB TIME (DELAY TIME): MENU PAGE 3
On menu page 3 you can change the delay time. The range of possible values can be seen from
the table. With the delay effects you can also select the setting "Synced", instead of delay time in
milliseconds. This setting equals the note values in the above table.
Edit Part1 FX1
<3> Time: SYNCED
FEEDBACK: MENU PAGE 4
The delayed signal can also be mixed back to the input of the delay effect so that there are echoes
of the echoes. The Feedback control turns up the proportional volume of these extra echoes,
which otherwise diminish to silence. At louder levels more distinct repeats are audible. With an
extreme setting the delay repetition can be as loud as the original sound going into the input. In
connection with the flanger or chorus effects and having the feedback settings above 80% you can
hear a metallic feedback sound. Now select menu page 4 of the FX-1 or FX-2 menus. There you
can adjust the degree of the feedback.
Edit Part1 FX1
<4> Feedback: 40
FEEDBACK FILTER: MENU PAGE 5
In the feedback branch of the delay effects you find a 6dB LPF filter that muffles every delay
repetition. Now select menu page 5 to change the cutoff frequency of this filter. The higher the
adjusted values the stronger the reduction of the signal amplitudes.
Edit Part1 FX1
<5> FbFilter: 126
MODULATION SPEED (RATE): MENU PAGE 6
The delay time of the effect instruments can be changed cyclically through a modulation oscillator.
A sine signal is responsible for a uniform shortening and lengthening of the delay time. On menu
page 6 you can change the speed of the modulation. To hear a change, the parameter „Depth" on
menu page 7 has to have a value larger then 0. Most important is the effect of modulation on the
chorus or the flanger effect. Now select menu page 6 with [PAGE<>] to change the speed of the
modulation:
Edit Part1 FX1
<6> Rate: 2
MODULATION INTENSITY: MENU PAGE 7
On this menu page you can change the depth of the delay-time modulation. Depending on the
setting you get a drastic or more likely a subtle effect.
Edit Part1 FX1
<7| Depth: 54
35
The Synthesizers of the POLYMORPH
