EazyRizer™
Assembly Instructions
Dear EazyRizer™ Owner,
Congratulations on your purchase of EazyRizer, the world’s safest and most versatile motorcycle lift.
With regular maintenance and careful handling, EazyRizer will provide you with a lifetime of service.
Just in case, each EazyRizer lift comes with a
lifetime mechanical warranty
for the original
owner.
PLEASE READ CAREFULLY all of these assembly instructions presented here before you attempt to put
together your lift. If you are in doubt regarding any of the assembly steps, please feel free to call us at
1-800-627-1700 for assistance.
Happy lifting with EazyRizer.
WWW.ON-BIKE.COM
Manufactured by
North American Distributor:
Quasar Products Ltd.
Driven Gear Inc.
The Sovereign Center Neander
2818 S. I-85 Service RD., Suite C
Tamworth, Staffordshire, England V79 7XA
Charlotte, NC 28208
44-01827-61754
704-394-2080
Step 1:
Recommended tools required for assembly:
- torque wrench
- 13 mm open end wrench
- 13 mm socket
- 17 mm socket
- socket wrench
- adjustable wrench
- 22 mm socket
- good quality car wax / polish
With the shipping carton in the proper “This End Up” position, carefully
cut the sealing tape and remove all of the carton strapping.
Step 2:
Carefully, remove all of the component pieces inside and lay them aside.
All of the lifting attachments you ordered will also be inside this carton.
You may find some of the smaller lifting attachments wrapped in bubble
wrap placed inside the carton spacing sleeves.
Step 3:
There are only 3major components that make up EazyRizer. Pictured to
the right is the “H” base frame. You will find (2) 17 mm bolts with
washers and (2) 13 mm bolts with (4) washers and (2) Nylock™
locking nuts. Remove the bolts, nuts, washers for now and put them
aside in safe place.
