EazyRizer Assembly Instructions (09/01)
Page - 7-
EazyRizer General Safety & Use Instructions
Manufactured by
WWW.BIKE-LIFT.COM
North American Distributor:
Quasar Products Ltd.
Driven Gear Inc.
The Sovereign Center
2818 S. I-85 Service RD., Suite C
Tamworth, Staffordshire, England
Charlotte, NC 28208
44-01827-61754
704-394-2080
Prior to lifting your motorcycle for the first time
please read carefully
the following general safety and use
instructions. You must also read carefully each of the individual lifting bracket safety and use instruction sheets.
Use common sense when lifting your motorcycle. If you are in doubt regarding any of these instructions,
STOP
,
and contact us for further clarification.
1.
DON’T
operate the lift with worn or damaged parts as this may compromise the safety of the
equipment.
2.
DO
double check all mounting attachments, bolt torque and lubrication of the screw shaft, bronze lifting
nut and top bearing prior to each lift.
3.
DO
keep hands, feet, long hair and loose clothing away from all moving parts while in operation.
4.
DO
always position the EazyRizer lift on a flat, level and solid surface.
DON’T
use the EazyRizer lift
on a sloping, soft or uneven surface.
5.
DON’T
climb onto the vehicle or the lift when elevated.
6.
DO
use the assistance of another person while you position and raise your vehicle with EazyRizer until
such time as you feel sufficiently confident and proficient with its operation.
7.
When work involves wheel, front forks, engine removal,
DO
complete all heavy torquing at ground level
and then raise to suit.
8.
DON’T
attempt to make any adjustments to EazyRizer or the mounting attachments when elevated.
9.
You may use an electric drill to raise and lower your vehicle. Clockwise to raise; Counter-clockwise to
lower. Recommended Electric Drill Specifications:
a)
Must be variable speed, non-impact, non-hammer type
b)
Minimum Output Wattage - 600 Watts
c)
Maximum RPM - 850 RPM (the lower this number the better; more torque)
d)
Minimum Torque - 350 inch / pounds
Note:
A cordless drill may be used but should be rated at a minimum of 14.4 volts and meet the above
minimum torque specifications.
10.
When using an electric drill,
DO
be careful to slow down when raising the vehicle as it approaches the
top of its travel. Otherwise, the drill may suddenly twist in your hand and may cause damage or injury.
EazyRizer has a rated lifting capacity of 770 pounds via the chassis method and 550 pounds via the
