|Quasar Science
8
Basic Features
1.
CCT control
a.
Turn the analog CCT dial to the desired color temperature:
b.
Color temperatures are shown divided by 100 (2000K/100 = 20, 3000K/100 = 30, etc) for
legibility and precision marking on the dial
2.
Dimming
a.
The Q-LED crossfade lamps are capable of dimming down while maintaining color
temperature.
b.
The Q-LED crossfade lamps are dimmed by an external TRIAC AC source.
c.
To Dim Q-LED crossfade lamps, plug the installed P1G into:
i.
AC power wired up to a wall-dimmer switch
ii.
AC power wired up to a TRIAC dimmer source
iii.
AC power connected to a stand-a-lone TRIAC dimmer plugged into AC-power
3.
Dimming Equipment recommendations
f.
NOTICE
The crossfade lamps must be dimmed with TRIAC AC dimming circuits.
VARIAC type dimmers will not work.
g.
Reverse-phase (trailing edge) TRIAC AC dimming circuits will enable lower dim levels
with less potential strobing issues.
h.
CFL/LED TRIAC AC dimming circuits must have a circuit that enables stable low voltage
operation.
i.
The following dimmers work well with crossfade products:
i.
Lutron CF line of household dimmers
ii.
ETC Sensor
iii.
RatPac dimmer products
20—
