User Manual – Diamond 8 Plus
3. Storage and Care
Control Unit:
Check the power cord and plug for abrasions and excessive wear
Plug in the unit and verify air flow from the hose connection ports
Place in plastic bag for storage
Mattress Replacement System:
Check the air manifold for kinks or breaks. Replace if necessary
Twist open the CPR plug at the head of the mattress and disconnect the air
feed tubes. All of the air will be expelled. Starting at the head of the
mattress roll towards the foot of the bed. Use the base mounted straps to
secure.
Place the system in a plastic bag for storage.
It is recommended that the following guidelines are used whenever the system is
being stored or transported to another location:
Temperature limitations
-25
60
o
C
�
C ~ 70
o
C
Relative humidity
30% ~ 93%
4. Waste Disposal
This Product has been supplied from an environmentally aware manufacturer that
complies with the WEEE.
This product may contain substances that could be harmful to the environment if
disposed of in places (landfills) that are not appropriate according the legislation.
Please be environmentally responsible and recycle this product through your
recycling facility at its end of life.
