Quark-Elec QK-G022, Руководство пользователя

Страница: 7 / 31

Quark-elec Manual
https://www.quark-elec.com 7 of 31 2018
V2
5. Preparing SIM card
Please ensure:
 The SIM must operate on the GSM (2G) network. Most network providers provide 2G cover, check with
your supplier.

There is credit on the SIM (we recommend automatic top-ups)
 The SIM is not PIN protected
 The SIM is set to disable voicemail
 Avoid SIM cards that deactivate automatically if the SIM is not used often (usually after 3 months
inactivity).If you’re SIM will do this and if you’re G021/22 is likely to be unused for long periods of time; send the
G021/22 an update request periodically to keep the SIM card active.
Register the SIM card; ensure there is sufficient credit on the card for programming confirmation texts to be sent
from G021/22 module.
The PIN request option should be disabled from the SIM card before inserting it into the G021/22 module. To check
the PIN request status of your SIM card, place the card in an unlocked mobile phone and switch the phone on. If
normal calls can be made without entering a PIN number, then it is disabled. Please also make sure voicemail is
disabled before inserting the SIM card into the module.
If a ‘pay as you go’ (PAYG) SIM card is used, it is recommended that users choose to automatically ‘Top-Up’ when
the credit falls below a certain limit. Some PAYG SIM cards will be de-activated by the network if they are not used to
make an outgoing voice call or send an SMS text message within a specific period. To prevent this, simply send the
G021/22 a text ‘ DQSJ ’ (this can be done through the APP) and G021/22 will reply with the local time by text
message. This should be done once a month to keep the SIM card active.
5.1. Insert SIM into the SIM card slot

Write down SIM number before inserting into G021/22
 The SIM card should be inserted into the SIM card slot before applying the power.
 Power Up
The G021/22 module can be powered by 12V to 24V DC power supply).
Connect a 12V DC power supply to the power screw terminals 1 & 2, ensuring positive is connected to terminal 1
and switch on the power supply.
 The red power LED will flash at 1 second intervals once the system has finished initialization.
 The blue network LED
indicator will initially flash quickly and, once logged onto the network, it will flash more
slowly, approximately once every 3 to 4 seconds.