Quark-elec Manual
5 of 8
2018
V2.0
5. Configuration
Operator can configure the position information (Latitude, and longitude), and the repeat message
times through the application.
A proper driver is needed before the configuration, for Windows 7, 8, Vista system, the driver is
needed and can be downloaded from the Quark-elec website at (same as A021/023):
https://www.quark-elec.com/product/a023-ais-wireless-receiver/
For Windows 10, the system will recognize and install the driver automatically after AT011 connected
with the computer.
6.
Status LED’S
The AT011 simulation terminal has two LED’s. One for power and one to show AIS signals being
emitted from the terminal.
•
Power:
solid red to indicate the correct power levels
•
AIS:
flash green for every valid signal sent from terminal
