22
The Man Down status will not be memorized once radio power off.
Man Down Backup (optional)
Press the programmed function key to activate the Man Down mode, horizontally or
inversely position the radio will activate an alert tone, a defined emergency procedure is
activated if the radio is horizontally or inversely positioned for a certain length of time.
Place the radio vertically to cancel the emergency procedure.
The Man Down status will be memorized after radio power off.
Monitor/Squelch Off
z
Monitor
Press the Monitor key to open signaling squelch. Press it again to close.
z
Monitor
Momentary
Press and hold the Monitor Momentary key to open signaling squelch. Release it to close.
z
Squelch
Off
Press the Squelch Off key to open noise squelch. Press it again to close.
z
Squelch
Off
Momentary
Press and hold the Squelch Off Momentary key to open noise squelch. Release it to close.
Power Level(H/M/L) /Power Level Indicator
Short press the Power Level key to change the power level, the power increases by 1
level upon every press of the function key (low~med~high cycle). You change is saved.
Upon long press the programmed Output Power Check key, the radio reports the output
power level set on the current channel, with one beep for low power level, two beeps for
medium power level, or three beeps for high power level.
Rental Time Indicator
Upon press the programmed Rental Time Indicator key, the radio sounds “1”, “2”, “3”, “4”,
or “5” to indicate the remaining time that the user is allow to use the radio. The Rental
Time is programmable by your dealer.
Scan
Press the programmed Scan key to initiate radio scanning from the current channel, and
ascends through the channel numbers in scan list. The green LED flashes when scanning
proceeds, and solidly glows when a signal is received with signalling match on a channel.
