manualshive.com logo in svg

QUANTUN QP-750, Руководство пользователя

Поделиться
Скачать
QUANTUN QP-750 Скачать руководство пользователя страница 22

 21

on radio, the current channel number will not be heard. 

Please select the volume level as "1", when using an earpiece. 

 

Channel Lock 

Press the programmed function key to activate the Channel Lock mode, When the 

Channel Lock feature is activated, rotate the channel selector is invalid. 

Emergency 

Press the programmed Emergency key to emit emergency alarm, or send ANI 

(Emergency Automatic Number Identity) / background tone to a pre-defined person or the 

dispatcher (selectable via programming software). You may long or short press the 

programmed Emergency Cancel function key to temprorily cancel the emergency 

procedure. 

Lone Work 

The feature provides added security and safety for individuals who work remotely from 

their team. Press the programmed function key to activate the Lone Work feature, the 

radio is set up to request a response from a user at regular intervals. Should a user not 

press any key as response to a regular warning tone, then a defined emergency 

procedure is activated. 

The Lone Work status will not be memorized once radio power off. 

Lone Work backup 

The feature provides added security and safety for individuals who work remotely from 

their team. Press the programmed function key to activate the Lone Work feature, the 

radio is set up to request a response from a user at regular intervals. Should a user not 

press any key as response to a regular warning tone, then a defined emergency 

procedure is activated. 

The Lone Work status will be memorized after radio power off and on. 

Man Down (optional) 

Press the programmed function key to activate the Man Down mode, horizontally or 

inversely position the radio will activate an alert tone, a defined emergency procedure is 

activated if the radio is horizontally or inversely positioned for a certain length of time. 

Place the radio vertically to cancel the emergency procedure. 

Содержание QP-750






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды