Quantum TRU-BALANCE 3, Основные инструкции по эксплуатации, Страница: 18 / 28

18
Seatback
The Seatback can be adjusted for height and width.
To adjust the height and/or width of the seatback:
1. Loosen the hardware.
See figure 21.
2. Place the seatback into the desired height and/or desired
width.
3. Tighten the hardware.
Figure 21. Height and Width Adjustments for Seatback
Hardware to adjust Seatback Height
Hardware to adjust Seatback Width
Installation and Use
The TRU-Comfort consists of a seatback cushion, lumbar
support, lateral supports, lateral wings, and/ or thoracic
supports that can be placed as needed for user comfort and
positioning. They may be attached to the seatback either
with reusable hook and loop fasteners or hardware, or they
may be incorporated inside the seatback cushion.
To place the TRU-Comfort positioning components on
the chair:
1. Position the lumbar and thoracic support(s) as needed
for user comfort and positioning flat side down and push
onto the seatback. Position the lateral supports and
lateral wings as needed and attach with hardware.
See
figure 22.
2. Position the seatback cushion so that the reusable hook
and loop fastener straps face the seatback. Place the
cushion over any lumbar, lateral, and thoracic support(s).
Secure the cushion to the seatback by sliding the two (2)
long loop fastener straps through the anchor hooks and
pressing the two (2) short hook fastener straps against
the longer straps.
See figure 22 or 23.
Extreme temperatures can affect the temperature of
your cushion components and may cause skin irritation.
Use caution when your power chair has been used or
stored in an extremely hot or cold environment.
Ensure all hardware is installed and tightened properly.
WARNING!
BASIC OPERATION INSTRUCTIONS
TRU-Comfort
The TRU-Comfort cushion is a unique seatback that is available
for user comfort and positioning needs.
Figure 22 provides
information on the removable and adjustable TRU-Comfort
components. Use these diagrams to familiarize yourself with
the function and location of each component before using
the TRU-Comfort cushion.
See figures 22 and 23 to identify
which seatback is on your power chair.