Quantum StorNext G300 R520, Руководство по оборудованию

Страница: 32 / 52

Chapter 2: Hardware Overview
StorNext G300 Connectivity
28 StorNext G300 Gateway Appliance Hardware Guide
Fibre Channel Cable
Connections for SAN
Access
Each StorNext G300 contains one 2-port 8Gb Fibre Channel (FC) host
bus adapter (HBA) card in PCIe expansion slot 3.
Note: If small form-factor pluggable (SFP) FC adapters are needed,
use only Intel-based SFP adapters. SFP adapters from other
vendors are not compatible with the FC HBA card used in the
StorNext G300. Twinax cables have the adapters built into the
end of the cable, so they do not require SFP adapters.
Connect the FC host ports to your SAN as shown in Figure 11 on
page 29.
5 eth4 PCIe Slot 2
Port 1
LAN Client (10GbE) Bond 1 – The default is for
all the LAN client ports to be
bonded. The ports are either
bonded or given individual
IP addresses.
6 eth5 PCIe Slot 2
Port 2
LAN Client (10GbE)
Physical
Ethernet
Port
Number
Logical
Ethernet Port
Number
Port Physical
Location Port Function Network Bonds