Quantum SPARK 1575, Руководство по началу работы, Страница: 39 / 90

Using the First Time Configuration Wizard
Quantum Spark 1575 / 1595 Appliance Getting Started Guide | 39
Using the First Time Configuration
Wizard
Configure the Quantum Spark Appliance with the First Time Configuration Wizard.
To close the wizard and save configured settings, click Quit.
Note - In the First Time Configuration Wizard, you may not see all the pages
described in this guide. The pages that show in the wizard depend on your appliance
model and the options you select.
Starting the First Time Configuration Wizard
To configure the 1575 / 1595 Appliance for the first time after you complete the hardware
setup, use the First Time Configuration Wizard.
WiFi models with a special device label only:
If you did not yet run the First Time Configuration Wizard, you can connect through WiFi using
the SSID and WiFi password that appears on the sticker. This is unique for each appliance.
If you do not complete the wizard because of one of these conditions, the wizard will run again
the next time you connect to the appliance:
n The browser window is closed.
n The appliance is restarted while you run the wizard.
After you complete the wizard, you can use the WebUI (web user interface) to change settings
configured with the First Time Configuration Wizard and to configure advanced settings.
To open the Appliance WebUI, enter one of these addresses in a web browser:
n http://my.firewall
n https://192.168.1.1:4434
If a security warning message shows, confirm it and continue.
The First Time Configuration Wizard starts.
Welcome
The Welcome page introduces the product and shows the name of your appliance.