Rails Assembly
QXS 48-Drive Rackmount Install Guide
5
Rails Assembly
Note:
The two rail kit installation pictorials immediately following show the left and right rails viewed
from the front and looking rearward. An assembly and an exploded view is provided for each rail.
Left Rail Assembly
Complete steps 1–3 to assemble the rails.
Note:
Refer to callout 1 in
Figure 3 below
for the assembled left rail (ready for installation into the rack).
1. Slide the rear rail insert (callout 4,
Figure 3 below
) into the front rail sleeve (callout 2,
Figure 3 below
).
Figure 3:
Left Rail Kit Components (assembly and exploded views)
1
2
3
4
5
1.
Left rail assembly
2.
Front rail sleeve
3.
Rail shelf
4.
Rear rail insert
5.
Screw: Code B - P/N: 01-00000262-00-01
2. To determine the cabinet depth required by the rails, fit the rail assembly (callout 1) to the rack and note
which tapped holes in the rear rails align with the front rail’s slotted holes. If cage nuts are pre-installed,
remove them.
