Quantum PX500 Series Tape Drive Installation Instructions
81-81301-04 A01
August 2006
8
Cabling the Tape Drives
Figure 4 Installing a Tape
Drive
Proceed to
Cabling the Tape Drives
.
Cabling the Tape Drives
0
After the tape drive(s) have been installed, you must connect SCSI or Fibre
Channel cables to each drive.
Refer to the following figures to cable the tape drives:
•
PX502 Libraries
on page 9
• SCSI tape drives (see
figure 5
)
• SCSI tape drives in surrogate mode (see
figure 6
)
• Native Fibre Channel tape drives (see
figure 7
)
•
PX506 Libraries
on page 11
• SCSI tape drives (see
figure 8
)
• Native Fibre Channel tape drives (see
figure 9
)
•
PX510 Libraries
on page 13
• SCSI tape drives (see
figure 10
)
• Native Fibre Channel tape drives (see
figure 11
)
Tape drive 1
Captive screw
Tape drive 2
Captive screw
PX502 shown
