Quantum ATL P4000 and ATL P7000 Prism FC470 User’s Guide Addendum
Document 6331190-01, Ver. 1, Rel. 1
July 2003
6
FC470 Overview
Figure 1 FC470 Overview
SCSI Ports
0
The FC470 contains four SCSI ports or buses (port 0, port 1, port 2, and
port 3). When the SCSI port (bus) is connected to a tape drive, the
corresponding LED is lit indicating activity on the SCSI bus.
Fibre Channel Ports
0
The FC470 contains two Fibre Channel ports (port 0 and port 1). Each
port has two corresponding LEDs. The top LED indicates activity on
the Fibre Channel port and the bottom LED indicates a valid Fibre
Channel link on the port.
Ethernet Port
0
The FC470 contains one Ethernet port which is used for remote
configuration and bridge management. The port has two
corresponding LEDs. The top LED indicates activity on the port and
the bottom LED indicates a valid Ethernet link.
Serial Port
0
The FC470 contains one serial port which is used to access the serial
interface and locally manage or configure the bridge.
Power Indicator
0
The FC470 contains one power LED which indicates two power states
on the bridge. If the LED is green, the bridge is powered on. If the LED
is yellow, the bridge is in the process of performing a “Power-On-Self-
Test” or a the bridge has a processor problem.
SCSI ports
Fibre ports
RJ-45 port
