Quantum ATL P4000 and ATL P7000 Prism FC470 User’s Guide Addendum
Document 6331190-01, Ver. 1, Rel. 1
July 2003
FC470 Web Interface
19
Discovery Mode
View or set the FC470 discovery mode. The discovery
settings are (default: Manual):
• Auto Discovery on Reboot Events - the FC470
automatically discovers all Fibre Channel devices
when rebooted or when link-up events occur, such
as connecting cables or rebooting network hubs/
switches. Both the Fibre Channel ports and the
devices behind the ports are discovered on all
subsequent link-up events.
• Auto Discovery on Link Up Events - the FC470
automatically discovers all Fibre Channel devices
when rebooted or when link-up events occur, such
as connecting cables or rebooting network hubs/
switches. both the ports and the devices behind the
ports are discovered for the first link-up event.
Subsequent link-up events only discover the ports
and not the devices behind the ports.
• Manual Discovery - (default setting) when this
setting is selected, the FC470 only discovers new
devices when the Discovery option is selected from
the Main menu or when a Registered State Change
Notification (FSCN) is received from a fabric.
Buffered Tape
Writes
View or set the buffered tape writes setting (default:
enabled). When enabled, buffered tape writes return
status on consecutive write commands prior to the
tape device receiving data.
Buffered Tape
Queue Depth
View or set the buffered tape Queue depth. Select a
setting of 0 through 10 from the drop down list.
Default Map
View or set the mapping mode for the selected port.
The port mapping settings are (default: indexed):
• Port 0 or Port 1 Device Map
• Indexed (default setting) - the indexed map should
NOT be edited for security reasons.
• Auto-assigned - contains all SCSI devices that are
attached to the FC470
• SCC
Performance
Mode
View or edit the FC470 performance mode. The FC470
Fibre Channel port speed can be set to either 1GB/sec
or 2GB/sec. Ensure that the FC470 and the fabric or
loop are set for the same network speed. You may
experience framing errors if the network and FC470
speeds are set differently.
Field
Description
