Quantum Europa, Руководство по эксплуатации

Страница: 15 / 20

15
Table 1. Error Codes
Error Code Fault Diagnosis Solution
1 DX Module Fault An auto download has occurred.
The Europa is not correctly programmed.
The connection between the power module
and the joystick module may be faulty. See your Pride/Quantum Provider.
2 DX Accessory Fault The accessory module (CLAM) has a fault. See your Pride/Quantum Provider.
3 Left Motor (or
connection) Fault The connection between the power module
and the left motor is either open or is
shorted or the motor itself is shorted. Check left motor writing.
4 Right Motor (or
connection) Fault The connection between the power module
and the right motor is either open or is
shorted or the motor itself is shorted. Check right motor writing.
5 Left Park Brake (or
connection) Fault The connection between the power module
and the left park brake is either open or
shorted or the motor brake itself is shorted. Check motor/brake wiring.
6 Right Park Brake (or
connection) Fault The connection between the power module
and the right motor brake is either open or
shorted or the motor brake itself is shorted. Check motor/brake wiring.
7 Low Battery Fault Battery voltage has fallen below 17VDC. Check that the battery wiring is secure.
8 Over-voltage Fault The battery voltage has exceeded 32VDC. Check that the battery wiring is secure.
9 CANL Fault The DX Bus cable has a short or an open. See your Pride/Quantum Provider.
10 CANH Fault The DX Bus cable has a short or an open. See your Pride/Quantum Provider.
11 Stall Timeout The motor has been close to or at the
programmed current limit. Turn unit off, then on.
12 Module Mismatch There is an incompatibility between the DX
modules in the system. See your Pride/Quantum Provider.
Care and Maintenance
Refer to your power chair owner’s manual for proper cleaning and disposal instructions.
Warranty
Refer to your power chair owner’s manual for specific information on controller warranty.