Quantum DXi6902, Руководство по обслуживанию на месте, Страница: 134 / 242

Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing Node Expansion Cards
110 Quantum DXi6902 User’s Guide
Replacing an Expansion
Card in Riser 1
This section describes how to remove and replace an expansion card in
expansion card riser 1. The following cards are located in riser 1 (see
Figure 59 ):
• Slot 1 (top) - Dual port 10 GbE card (Intel X520 DA2)
• Slot 2 (middle) - One of the following options:
• No card
• Dual port 10 GbE card (Intel X520 DA2)
• Quad port 1 GbE card (Intel i350)
• Slot 3 (bottom) - Dual port 8 Gb Fibre Channel card (Qlogic
QLE2562)
Caution:
Use appropriate ESD precautions, including the use of a
grounding strap, when performing this procedure.
Removing and replacing an expansion card in expansion card riser 1
includes the following steps:
• Removing an Expansion Card from Riser 1
• Installing an Expansion Card in Riser 1
Removing an Expansion Card from Riser 1
To remove a failed expansion card from riser 1:
Replacement quad port
6 Gb SAS card (LSI 9201-
16E)
PN 9-02592-01
Illustration Description