28
Initial Configuration
DXi6700 Installation and Configuration Guide
Connecting the
Ethernet Cables
Connect the Ethernet cables to the DXi6700 node as follows (see
).
Note:
The Ethernet cables are used for remote management and NAS connectivity.
Review the
DXi6700 Site Planning Guide
(PN 6-67200) located on the
documentation CD to determine the number of Ethernet cables to attach.
When connecting and disconnecting Ethernet cables or making configuration
changes, it is normal for the
Admin Alert
indicator to display on the remote
management console.
1
Connect up to two Ethernet cables to the motherboard ports (ports 0 and 1).
Figure 21 Connecting the
Ethernet Cables
2
Install a bezel on the front of the DXi6700 node and expansion module(s). The bezel
snaps into place on the front of the DXi6700 node to prevent the removal of the
system from the rack (see
).
Note:
The keys that lock and unlock the front bezel are located in the accessory
kit.
1
2
3
4
5
6
1
0
3
2
Service ports (not
for customer use)
Motherboard ports
Not used
