Quantum DXi2500-D, Руководство пользователя

Страница: 78 / 162

Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
78 Replication CLI Commands
last replication status = Success
last synchronization start =
last synchronization completion =
last synchronization status =
Listing Deduplicated
NAS on the Source
syscli --list dedupnas
This CLI command allows the CLI admin to display a list of all NAS shares that
have data deduplication enabled. Replication information is also listed if it
applies. The list includes the NAS share name, replication options (state schedule
and/or syncid if any are set), last replication status (start, completion and status)
and or last synchronization status (start, completion and status).
Listing Replicated VTL
on the Target
syscli --list repvtl
This CLI command allows the CLI admin to display a list of all the replicated
virtual tape libraries (VTLs) that have been performed on the system as a target.
The list includes the virtual tape library name, source hostname IP address, the
replication status (i.e. start, completion and status).
An example output of this command:
List of all replicated VTL on the target.
Total count = 1
[replicated vtl = 1]
ID = 1
VTL Name = test1
Source Host = Galaxy3.node
-
1
Replication Started = Thu Mar 5 13:08:59 2009
Replication Finished = Thu Mar 5 13:08:59 2009
Replication Status = Success
Listing a Replicated
NAS Share on the
Target
syscli --list repnas
This CLI command allows the CLI admin to display a list of all the replicated NAS
share(s) that have been performed on the target system. The list includes the
NAS share name, source hostname IP address, the replication status (i.e. start,
completion and status).
An example output of this command:
List of all replicated NAS share on the target:
Total count = 2
[replicated nas = 1]
ID = 1