Quantum DLT 2500, Руководство по эксплуатации продукта

Страница: 78 / 345

Configuring and Operating the DLT2500 Mini-Library
4-14 DLT2000/DLT2500/DLT2700 Cartridge Tape Subsytem
4. Issue a bus reset or turn the mini-library power off and then on again so the drive
can recognize the new SCSI ID.
4.7 Selecting Density
This section describes the mini-library's density select feature.
__________________________Caution ___________________________
If a prerecorded tape and write from beginning of tape (BOT), all
prerecorded data is lost. This includes density changes, since they only
occur when writing from BOT.
____________________________________________________________
The user can select density by using any of the following:
1. On a write from beginning of tape (BOT), tape density is selected by one of the
following:
•
Front panel Density Select mode
__________________________NOTE ____________________________
The user can execute a front panel density selection at any time, but the
selection takes effect only on the next write from BOT.
____________________________________________________________
•
Programmable host selection via your operating system
•
Native default density 10 GB and Compress (assuming you did not use
the Select mode or the host selection)
2. On all read operations and all write append operations, the recorded density is the
density to be used.
__________________________CAUTION _________________________
Doing any write from BOT destroys existing data on tape.
____________________________________________________________