Quantum ATL SuperLoader ATL Скачать руководство пользователя страница 99

Страница: 99 / 196

Chapter 3 Media Changer Commands

Mode Sense (6) / (10) Command (1Ah/ 5Ah)

Quantum ATL SuperLoader Software Interface Guide

Test

Test bit. Used to generate false TapeAlert conditions to test the response

to failure conditions. See the Report Count/Test Flag Number

description for more information. If both Test and DExcpt are set to 1, the

drive will return CHECK CONDITION status, with a send key ILLEGAL

REQUEST, and additional sense data of INVALID FIELD IN

PARAMETER LIST.

LogErr

Error Log. Not supported.

MRIE

Method for Reporting Information Exceptions. The tape drive uses the

contents of this field to report information about exception conditions.

Value

Method

00h

No reporting of Informational Exception Conditions.

The device server does not report information exception

conditions.

03h

Conditionally Generate Recovered Error. The device

server reports information exception conditions, if such

reports of recovered errors is allowed, by returning

CHECK CONDITION status on the next SCSI command

(except INQUIRY and REQUEST SENSE commands)

following detection of the condition. The Sense Key is

set to RECOVERED ERROR with an additional sense

code of 5D 00 (TapeAlert Event). The SCSI command
with CHECK CONDITION completes without error

prior to the report of any exception condition, and does

not need to be repeated.

04h

Unconditionally Generate Recoevered Error. The drive

reports information exception conditions by returning

CHECK CONDITION status on the next SCSI command

(except INQUIRY and REQUEST SENSE commands)

following detection of the condition. The Sense Key is

set to RECOVERED ERROR with an additional sense

code of 5D 00 (TapeAlert Event). The SCSI command

with CHECK CONDITION completes without error

prior to the report of any exception condition, and does

not need to be repeated.

Field Name

Description

Содержание ATL SuperLoader ATL





































































































































































































Результаты поиска

Содержание ATL SuperLoader ATL

Отзывы:

Похожие инструкции для ATL SuperLoader ATL

Бренды по названию

Популярные бренды

Quantum ATL SuperLoader ATL, Руководство пользователя

Результаты поиска

Содержание ATL SuperLoader ATL

Отзывы:

Похожие инструкции для ATL SuperLoader ATL

Бренды по названию

Популярные бренды