Quantum Design ZillioX 6, Руководство пользователя

Страница: 34 / 59

Manual for ZillioX 6
Chapter 3
function and disables the power button’ s
power-on function. Other than choosing this option,
the password should be entered to implement this
function.
Mouse Left
The system can be powered up by double clicking
the left mouse button.
Mouse Right
The system can be powered up by double clicking
the right mouse button.
Note: If the option (Password/Mouse Left/
Mouse Right) is chosen, the jumper JP3
must be set as PIN1&PIN 2 closed, or it will
prevent you from powering up your system.
l
Onboard FDC
Enabled
Onboard floppy disk controller is enabled.
Controller
Disabled
Onboard floppy disk controller is disabled.
l
Onboard Serial
3F8/IRQ4,
Defines the onboard serial port address and required
port 1/2
2F8/IRQ3,
interrupt number.
3E8/IRQ4,
2E8/IRQ3,
Auto
Disabled,
Onboard serial port is disabled.
l
Serial Port 2
Normal
Defines Serial Port 2 as standard serial port.
Mode
ASKIR
Supports SHARP ASK-IR protocol with maximum
baud rate up to 57600bps.
IrDA
Supports IrDA version1.0 SIR protocol with maxiumum
baud rate up to 115.2Kbps.
l
Onboard Parallel
378/IRQ7,
Defines onboard parallel port address and IRQ
Port
278/IRQ5,
channel.
3BC/IRQ7
Disabled
Onboard parallel port is disabled.
l
Parallel Port Mode
SPP
Defines the parallel port mode as
EPP
Standard Parallel Port (SPP), Enhanced
ECP,
Parallel Port (EPP), or Extended
ECP+EPP
Capabilities Port (ECP).
l
PWRON After
Off
The system remains OFF when the AC power
PWR-Fail supply resumes.
On
The system will be powered up when the AC
power supply resumes.
Former-Sts
W hatever the system status is, before the AC
power supply cuts off, the system resumes
in the previous status (ON/OFF) when the AC
power supply resumes.
29