Quantum Composers 9730 Series, Руководство по эксплуатации

Страница: 9 / 48

5-9
Menus may include a number of different pages, with each page
containing up to four adjustable parameters or state variables. The status
block in the upper-left corner of the display shows a vertical arrow if the
current menu contains additional pages. To select the next page, press
the channel button again or select the same menu pressing the
FUNC key
and the channel/menu key again.
•
Selecting Menu Items
Within a menu, the blinking cursor indicates the current menu item for
editing. The
NEXT key will select a different adjustable menu item.
•
Numeric Input Mode
When the current item is numeric, the system enters the Numeric Input
Mode. In this mode data may be edited in one of two ways:
o
Arrow Keypad - The Left and Right arrow keys are used to select a
digit to edit. The selected digit blinks to identify itself as the active
digit. The Up and Down arrow keys are then used to increment or
decrement this digit.
o
Numeric Keypad - Enter the number, including decimal point using
the numeric keypad. Complete the number using the ENTER key.
Errors may be corrected using the backspace key or to start over
press the clear key (CLR). Pressing the
CLR key a second time will
exit the numeric keypad mode and restore the original number.
•
Entering Non-Numeric Parameters
When the current item is non-numeric, the Up and Down arrow keys are
used to select among different options for the parameter.
•
Alphanumeric Input Mode
When the current item is alphanumeric, the system enters the
Alphanumeric Input Mode. In this mode, data is entered using the
alphanumeric keypad. Pressing a key will display the first letter shown on
the keypad. Repeated key presses will toggle through all the letters, both
upper and lower case, shown on the key cap. To enter two letters which
appear on the same key cap, select the first character, then use the right
arrow to shift to the next position and enter the next letter. The Left and
Right arrow keys may be used to position the cursor to edit any character.
When data entry is complete, the ENTER key must be pressed. The keys
contain the following characters:
o
1 => 1 2 3 4 5 6 7 8 9 0
o
2 => A B C a b c 2
o
3 => D E F d e f 3
o
4 => G H I g h i 4
o
5 => J K L j k l 5
o
6 => M N O m n o 6