manualshive.com logo in svg

Quantum Audio QA3X, Инструкция по установке и руководство пользователя, Страница: 15 / 16

Поделиться
Скачать
Quantum Audio QA3X Скачать руководство пользователя страница 15

Problem:

Midrange speakers “pop” with loud passages.

Solution:

High-Pass Frequency Control is set too low.
Gain Controls on amplifiers are set incorrectly. Reduce the gain setting on high

frequency amplifier.

Problem:

One channel does not operate.

Solution:

Swap left and right connections at the source unit.  If the problem trades sides

in the vehicle, then the source unit is the defective.  If the problem stays on the

same side, proceed on.
Swap left and right connections at the input to the crossover.  If the problem

trades sides in the vehicle, then the wiring is defective between the source unit

and the crossover.  If the problem stays on the same side, proceed on.

Swap the left and right High-Pass RCAs at the output of the crossover.  If the

problem trades sides in the vehicle, then the crossover is defective.   If the

problem stays on the same side, proceed on.
Swap the left and right High-Pass RCAs at the amplifier input.  If the problem

trades sides in the vehicle, then the RCA cable is defective.  If the problem

stays on the same side, proceed on.
Swap the left and right speaker connections at the output of the High-Pass

amplifier.  If the problem trades sides in the vehicle, then the amplifier is

defective.  If the problem stays on the same side, then the speaker or speaker

wiring is defective.

QA3X SPECIFICATIONS

Power Source:

Input Current:

Distortion:

Frequency Response:

S/N Ratio:

Seperation:

Crossover Slope:

Input Impedance:

Output Impedance:

Output Gain:

Output Voltage Level:

Dimensions:

14.4 Volts DC

0.5 Amp Max

0.01% THD

10Hz - 30kHz - 3dB

>100dB

60dB

18dB per octave

20K Ohms

100 Ohms

1:2 (+6dB)

5 volts max

152mm x 180mm x 43mm

Troubleshooting Your System / Product Specifications

Troubleshooting

15

www.quantumaudio.net

Содержание QA3X

















Отзывы:

Нет отзывов