- 23 -
5.4 Temperature modification until the next manual interference
Set the required temperature using the large
and
buttons on the front
panel of the device. At this time, the
icon appears on the display, indicating that the
thermostat is operated with manual control. Then, press the “
HOLD
” button briefly, after
which the
icon appears and the
icon disappears. The device will then control the
boiler according to the set value until the next manual interference. During this time, the
thermostat acts exactly the same way as a non-programmable thermostat. The adjusted
temperature can be freely changed by using the large
and
buttons during this
temporary modification without exiting it.
If you wish to return to the set program, please press the “
SET
” button.
6. TURNING ON THE BACKLIGHT
When you press the “
LIGHT
” button, the backlight of the display will turn on for 15 sec
-
onds. When you press another button while the display is illuminated, the backlight will
turn off only after 15 seconds have elapsed since the last button had been pushed.
If you would like the backlight to turn on automatically after a button is pressed,
then press the “
LIGHT
” button for 5 seconds. After this the backlight will automatically
turn on after any button is pressed and will turn off 15 seconds after the the last button
had been pressed. Turning the automatic backlight function on is shown on the display
after pressing the “
LIGHT
” button for 5 seconds: in the place of the exact time the notice
“
” appears for 3 seconds. If you press the “
LIGHT
” button for 5 seconds again,
