18
Graphic load percentage indicator shows the fraction of the maxi-
mum possible power at the current input voltage.
The inscription "in" indicates the input voltage in the second line.
The inscription "out" indicates the output voltage in the second
line.
From left to right: input voltage, in Volts; the percentage of load
from the maximum possible power at the current input voltage;
output voltage in Volts and tenths of a Volt
• ADDITIONAL SCREEN NO.3
Displayed after triple-pressing the “Right” button.
From left to right: input voltage, in Volts; the percentage of load
from the maximum possible power at the current input voltage;
output voltage in Volts and tenths of a Volt.
Second level menu screens:
The second level menu screens are intended for the advanced
user. In addition to monitoring the parameters, some of the
screens enable to change the operation of the device, be careful!
You can change the output voltage: precise regulation within ±3%
and switching from 220V to 230V and back. It is also possible to
test coolers (set the speed to check the quality of the coolers, the
absence of unnecessary noise). To enter the second level menu,
long press the left button under the screen (not less than 6s). To
exit these menu items to the default screens either turn off the
power or long press the left button again.
• SCREEN NO.1. TEMPERATURE SCREEN
The temperature of the main elements of the device, in degrees
Celsius (°С). The maximum temperature may not exceed 80 de-
grees, otherwise the device will shut down.
• SCREEN NO.2. MAXIMUM VALUES INFO SCREEN
Hint for the following three screens. On the peak screens, press
the middle button to reset it. There are no functions for the mid-
dle button on this screen.
• SCREEN NO.3. MAXIMUM RECORDED LOAD
Maximum recorded load since the last time the device was
switched on. It is reset when the regulator is switched off. It is
displayed in Watts (W). It can also be reset by pressing the mid-
dle button.
In POWER Out
160V
25C
220.2V
Temperature
31.2 degr. C
Reset Button
fixed VALVE
Fix Voltage Max
INPUT: 321V
QUANT-9
Automatic voltage regulator, one-phase
