Quant 3D Q300 3D, Руководство пользователя

Страница: 26 / 33

Calibration for the Correct Dimensions
If your printed models are too big, too small, or skewed, you can re-calibrate the printer
to print in the correct dimensions by printing a calibration model, measuring its
dimensions, and sending feedback to the software.
Load and print the
calibration model:
C:\ProgramFiles\UP\Exa
mple\Calibrate96.UP3
Select 3D
Print –
Calibrate
. This will open
the calibration panel.
Click "Reset" to revert the
value back to the default.
Make sure the window
ribbon displays:
XY: 0.00Deg / XZ:
0.00Deg.
Manually measure the
printed model as shown
in the calibration window.
Input the measured
values into the software
and finish the calibration.