Quanser VoltPAQ-X1, Руководство пользователя

Страница: 8 / 9

4. Electrical Specifications
When the VoltPAQ unit is switched on, it takes about 5 seconds to power up. This is normal behaviour.
The internal power supplies take a few seconds to start up.
AC Input Specifications
PARAMETER MIN TYP MAX UNITS
Input Voltage 100-132 N/A 180-240 VAC
Input Current 1.5 @ 220V
2.8 @ 110V A (rms)
Input Frequency 47 63 Hz
Amplifier Specifications
PARAMETER MIN TYP MAX UNITS
Output Voltage (to load) -24 24 V
Max Continuous Current Output -4.16 4.16 A
Voltage Gain *1 or 3 V/V
Current Sense 1 A/V
Amplifier Command Voltage -10 10 V
*The gain is selected by the gain toggle switch on the front panel.
5. Fuses
Fuse 1: Slow Blow 1A – Digikey# F2543-ND (use this if your AC input voltage is 200-240VAC)
Slow Blow 2A – Digikey# F2544-ND (use this if your AC input voltage is 100-120 VAC)
Fuse 2: Slow Blow 400mA – Digikey# F2537-ND (use this if your AC input voltage is 200-240VAC)
Slow Blow 800mA – Digikey# F2542-ND (use this if your AC input voltage is 100-120 VAC)