Quanser QBall 2, Настройка и конфигурация

Страница: 38 / 41

1. The correct number of cells and charge must be set. Set the charger to 3-cell LiPo battery,
11 . 1(3 S )
, and
a charge rate of
2 . 7
A
(since the supplied batteries have a rating of
2700
mAh
). Use the navigation keys to
change the settings as described in the battery charger's user manual.
2. Connect the battery with the appropriate wires. Also, connect the balancer cable to the balancer. The
connections are labeled according to the number of cells in the battery. Refer to your user manual for the
battery details.
3. Start the charger according to the procedure described in the charger user manual. Typically this is done by
holding the Start/Enter button until a beep is heard and if prompted to confirm press START again to begin
charging.
4. Upon completing a full charge the charger should beep and display that the charge is complete.
QBALL 2 - User Manual 38