SETUP
1. Connect power to the device using
the micro-USB power adapter
included.
2. Check that the STATUS LED is WHITE.
White light indicates that the device is
working normally. If no LEDs are lit,
check that the wall socket or power
adapter is functional.
Wi-Fi SETUP
To be able to follow the device's
measurements and alarms remotely
via a smartphone, an app and a
connection to a Wi-Fi network are
required.
Download and install the Quandify
app from App Store or Google Play
Store and follow the instructions.
HOT/COLD WATER PAIRING
1. Install and start the CubicSecures.
One for hot water and one for cold
water.
2. Hold down the CONNECT button for 5
seconds on the device installed for
cold water. The CONNECT LED starts
flashing YELLOW and BLUE.
3. Hold down the CONNECT button for 5
seconds on the device installed for
hot water. The CONNECT LED starts
flashing YELLOW and RED. You can
also press once on CONNECT to
switch the hot/cold water designation.
4. Make sure that the CONNECT LEDs on
both devices flash GREEN rapidly for
about a second.
If pairing was not completed, redo process
steps 2 to 4. To delete a pairing, perform a
factory reset.
Two CubicSecures installed in a cabinet.
Details are subject to change, check the latest version
.
The company is not liable for possible errors and/or misprints.
5 of 11
