FUNCTIONAL WATER FLOW TEST
1. When the proper pipe has been selected, open any water tap to get a steady water flow.
2. Check the LCD now shows a flow rate (l/h).
306 liters per hour with correct water flow direction
3. Turn off the water by closing the tap and check the flow rate on the LCD that it is now near 0
l/h.
If step 2 or 3 was unsuccessful, please make sure you followed the installation and pipe setup
instructions correctly. You can also try to rotate the device around the pipe, in case the pipe has
been deformed.
Note that if the meter has been activated for more than 1 hour, it will instead show total water usage
in m
3
.
ANTI-TAMPERING
Attach optional anti-tampering sealing cover and stickers to prevent unauthorized removal of device. Do
this only after a verified installation.
Details are subject to change, check the latest version
.
Page 7 of 11
The company is not liable for possible errors and/or misprints.
