QUALITYFRY iQ 600 Скачать руководство пользователя страница 95

Страница: 95 / 134

9 5

E N

“PROBE 2

ERROR”

The oil level is incorrect.

Fill the vat with exactly 5.5 litres

of oil.

Elbow plug disconnected.

Check the elbow plug and resistor

connections.

Bad connection between the angled

cable and the resistor.

Check that the black gasket is inside

the heating unit.

Oil level Probe (S2) faulty.

Contact Technical Support.

Resistor damaged.

Contact Technical Support.

“OIL LEVEL LOW”

Part of the oil has been consumed

after having cooked several portions.

Add 0.5 litres of oil and wait 2 minu-

tes for the oil to heat up..

Bad connection between the angled

cable and the resistor.

Check that the black gasket is inside

the heating unit.

I have already added 0.5 litres of oil,

waited the suggested time and the low

oil level message is still displayed.

Contact Technical Support.

“CHANGE

FILTER”

The carbon filter needs to be changed.

Perform weekly/yearly maintenance,

including cleaning the coil, conden-

sation drum, metal filter, extraction

elbow, hatch motor support and

the fans.

After performing maintenance, go

to Technical Menu and press Menu

– Configuration — Enable Sensors,

and turn the flashing button on and

off six (6) times to leave it on. Press

Enter.

The change filter icon still appears.

Make sure that you have performed

the weekly/yearly maintenance of

the machine. Then go to Technical

Menu and press Menu – Configu

ration — Enable Sensors, and turn

the flashing button on and off six (6)

times to leave it on. Press Enter.

FIND
IN

ND
B

SIC

TIO

Содержание iQ 600







































































































































Результаты поиска

Содержание iQ 600

Отзывы:

Бренды по названию

Популярные бренды

QUALITYFRY iQ 600, Техническое руководство

Результаты поиска

Содержание iQ 600

Отзывы:

Бренды по названию

Популярные бренды