manualshive.com logo in svg

QUALITYFRY iQ 600, Техническое руководство

Поделиться
Скачать
QUALITYFRY iQ 600 Скачать руководство пользователя страница 64

M

ai

nt

enan

ce

1 .   W A S H I N G   M E T A L L I C   F I L T E R

 

The bimonthly process must coincide with the cleaning of the inside 
of the fryer and coincide with the full oil change.   One must repeat 
the steps previously explained plus the following additional ones. 

- To clean the metal filter, remove the fryer from the appliance as 

explained in the above steps.

- To gain access to the metal filter, open the two clips located on 
the metal box in the right-hand part of the unit. * This part can be 

washed in the sink or in the dishwasher.

- With the clips open, pull the door to the filters outwards.

The metal filter should only be removed for washing as the active 
charcoal filter should not be disengaged from its site, be washed or 

get wet,  although  it  can  be  cleaned  externally  with  kitchen paper  
or a dry cloth.

- Once the metal filter is clean, it should be inserted into place with 

the holes facing down.

Bimonthly

 

Use personal protection equipment (anti-cut gloves for work with 
steel or sheet metal and  protective gloves or  utensils against 
chemical agents) as mentioned in the Safety section.

6 4

Q U A L I T Y F R Y

6 4

Q U A L I T Y F R Y

Содержание iQ 600







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды