HUMIDOR INSTRUCTION MANUAL
INSTRUCTIONS FOR PROPER USE
Manufactured by:
Quality Importers Trading Company, Inc.
3350 Enterprise Avenue, Suite 120
Weston, FL 33331
BREAKING IN (SEASONING) YOUR HUMIDOR
The wood inside your humidor is high quality Spanish cedar that is kiln
dried. This process guards against sapping, splitting and warping. In order
for it to perform at its best, the wood must re-absorb moisture. Please follow
these directions to properly season your humidor.
1. Place a shot glass filled with distilled water in the bottom of your humidor.
2. Charge the humidifier (see humidifier section below) and place it inside
your humidor.
3. Place the calibrated hygrometer inside the humidor.
4. Close the lid.
5. Check the humidity reading on your hygrometer daily. When it reaches the
68-72% range, the wood has been properly stabilized. This is considered
the ideal range for proper cigar storage.
Note: Do not saturate the interior of your humidor with water. This may
cause damage.
HUMIDIFIER
Charging and Filling Your Humidifier
1. Remove the humidifier(s) from the humidor.
2. Fill your humidifier with a good quality Propylene Glycol/Distilled Water
Solution.
3. Do not overfill the humidifier. You want it wet, not soaking.
4. Wipe any excess liquid from the front of the humidifier with a clean dry cloth.
5. Re-attach humidifier back into humidor.
